When it comes to adding a professional finish to your outdoor landscaping, decorative stones are a fantastic option. However, achieving the desired look is not just about the choice of stones but also about the installation process. Laying decorative stones incorrectly can significantly affect the overall appearance of your garden or patio area. Fortunately, using Decorative stone Ton Bags is a simple and efficient way to achieve perfect results every time. In this article, we’ll take a closer look at how to lay decorative stones using ton bags for a stunning finished product.
When it comes to laying down decorative stone, ton bags are easily one of the most convenient options available today. Ton bags are large fabric sacks filled with a decorative aggregate like pebbles or gravel. These ton bags come in various sizes and colors, so you’re sure to find something suitable for your project. Furthermore, these pre-filled bags make achieving uniform results much easier since there is no need for precise measuring of individual materials. All you have to do is unload them onto the surface where they will be placed and begin spreading and leveling out the contents as desired.
Preparing the area for the decorative stone bags
Before you start laying your decorative stone ton bags, it’s important to prepare the area properly. This includes removing any existing grass or plants from the area where you are going to place your layer of stone aggregate and ensuring that it is level and free of any bumps or irregularities that could cause instability later on. Also, make sure that any areas around water pipes are covered with either plastic sheeting or tarpaulins to prevent them from becoming clogged with soil particles when you later level your aggregate layer.
Measuring and marking the surface
Once you’ve adequately prepared your surface, it’s time to start marking out exactly where each tonne bag should be placed to achieve an even distribution across the entire area covered by this new layer of decorative stones. To do this accurately, you will need to take careful measurements and use wooden stakes and string to help guide where each bag will go before you actually place them in their final position. Once you have completed this step, check again in case there are any adjustments that need to be made before you start the actual installation.
Placing the decorative stone bags
Now that everything has been measured and marked out as required, it’s time to actually place each tonne bag of aggregate in its designated spot on the landscape surface below. Begin by carefully lifting each bag and then placing it over its respective location until it is completely set in place – repeat this process until all bags have been used up, at which point only minimal spreading work remains before finishing touches can be applied (if required).
Spread and level aggregate material evenly
Once all the sacks have been successfully placed in their pre-determined positions, use a rake to remove any excess soil particles while also helping to spread the material evenly over the entire area being worked at the same time (as per design specifications). Continue raking until both sides appear level – alternatively, the use of a hand-held vibratory plate compactor can also be a great help here if required, as it can smooth things over more quickly without having to put too much physical effort into the task either!
Final touches & clean up
Once the paving portion of the job is complete – finishing touches such as edging along walls or fences can now take place if desired, before cleaning up any mess that may have been made during the paving job itself (i.e. debris/muddy footprints, etc.). Once finished, sit back, relax, and enjoy your newly improved outdoor living space, knowing full well how perfectly laid those decorative stone ton bags turned out after following the instructions outlined above!