There is a hydroponic options available for cheap green ceilings (plafond vegetal pas cher). Have you ever been in a room where plants have grown out of control? How about a room where plants grew up through cracks in the floor and even through the walls themselves? These are no-fail methods for growing plants to create an “art” installation. In this article, we will look at the basics of how you can grow your own artificial plant ceiling.
You can grow a plant or two anywhere in your home, but when it comes to creating a whole series of them that appear to be growing from the ceiling, there is only one way to go – you need a hydroponic system. This type of setup allows us to grow plants without soil in place of nutrients. The trick with these systems is getting all the water and air necessary for the plants to thrive. There are many different varieties of hydroponics, so they each require their own unique setup. It doesn’t matter which one you choose, because the process is the same. All you have to do is follow the steps below to get started.
Step 1: Get Your Hydroponic System Ready
The first step is to get your hydroponic system ready by filling the reservoir with enough water to keep the roots happy. You don’t want them to dry out too quickly, so make sure you let them sit in the water for at least 24 hours before adding any food. After that, you’re going to add some fertilizer as well. The type of fertilizer you use depends on what kind of plants you plan to grow. Some people prefer using liquid fish emulsion, while others enjoy using a slow-release formula like Miracle Gro. Either way, you’ll just have to experiment to find out the right mixture for your plants. Don’t worry if you don’t know exactly how much to add; most of the time, you’ll probably end up having to adjust it later. Just take care not to overdo it. If you go overboard, your plants will become too fat and won’t grow properly.
Step 2: Add Water and Fertilizer
After you’ve filled the reservoir with water, it’s time to start adding food. To do this, you will have to open your reservoir for the first time. When you do this, there are certain tools you should always have handy. First, take a pair of scissors and cut a hole in the bottom of the reservoir. Next, grab a funnel and stick the opening into the hole. Then, take the hose and connect it to the funnel. Finally, fill the reservoir with water until the hoses reach the top. Once you’ve done that, you may want to add a little more water to ensure that the roots stay moist.
As soon as the water reaches the tops of the hoses, stop pouring. Now you need to add your fertilizers. Start by emptying out the container and separating out the different types of food you plan to put in your hydroponic system. Remember, the amount of fertilizer you use depends on the type of plants you want to grow. For example, you might need to use half the amount of liquid fish emulsion for flowering plants such as tomatoes and peppers, and twice as much for leafy greens like lettuce and spinach. Whatever the case, try to spread the food evenly around the surface of the water. Once you’ve added the food, close the reservoir back up again and wait for 24 hours before adding more water.
Step 3: Check on Your Plants
Now you’re almost ready to start growing! Before you do anything else, it’s important to check on your plants. Make sure the water level is still there and that the roots aren’t drying out. If they are, you need to add more water immediately. Also check the pH levels of the water; you want to see between 5.5 and 6.0. At this point, you’re pretty much good to go.
Step 4: Set Up Your Light
One thing you must remember to do once you’ve set up your hydroponic system is to turn on the light. Not only does this help your plants grow faster, but it also helps you keep track of things since you will now be able to monitor the progress of your plants. To do this, you will have to attach a small LED light bulb to the inside of the reservoir. Be careful to avoid touching the bulbs directly with your hands, as they contain high amounts of heat. Instead, hold them with long sleeves and use gloves. Be sure to change the bulbs every day, and make sure you leave enough space between the lights so the roots don’t get burned.
Step 5: Grow Your Plants
Now that you’ve got everything ready, you’re finally ready to start growing. Follow the instructions above to set up your hydroponic system, then simply add the food and water. Keep a watchful eye on the temperature of the water, and be especially careful to keep it cool.
If you plan on growing flowers, you should give them plenty of sunlight. However, if you plan to grow vegetables instead, they need less direct sun exposure. So depending on what you plan to grow, you may have to move your light fixture to allow the roots to grow as they please.
Finally, you will have to give your plants a break after a few days. This is because they need to rest and recover. As soon as they begin to wilt, you will have to replace the water with fresh. Doing this is easy, as you will just have to remove the old water and add new. You will also need to change out the food every week or so.
Once you’ve finished growing your plants, it’s time to clean up. Take everything apart, and thoroughly rinse the entire structure. This will help you remove any residue left behind by the food and water. Once you’ve cleaned everything up, you’re ready to get another batch started. And with that, you have created your own artificial plant ceiling!
Conclusion
You can get a hydroponic system for your plant in the ceiling hanging there first get ready the plant ready with water and fertilizer then set up the light and then grow the plants and there you go you can enjoy the stay in the room with the stuff.